Snmp Management Configuration - Panasonic GA-ML Series Manual

3.2.1.

SNMP Management Configuration

Press M (command) on the SNMP Configuration menu, and then you can see
SNMP Management Configuration Menu as Figure 3-4. You can configure the com-
munity name of SNMP manager on this screen. See the section 3.5, and change
the configuration of SNMP Agent to Enable in advance when configuring the
community name of SNMP manager. See the section 3.2.2 when designating host
IP address of SNMP manager.
PNxxxxxx Local Management System
SNMP Configuration -> SNMP Management Configuration Menu
SNMP Manager List:
No. Status
---- --------
1 Enabled
2 Enabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
-------------------------------- <COMMAND> -----------------------------------
Set Manager [S]tatus
Set Manager [C]ommunity
Command>
Enter the character in square brackets to select option
Screen Description
SNMP Displays the configuration of the SNMP manager, which is configured currently.
Manager List
No.
Status
Privilege
Community
Privilege Community
----------- ----------------------------
Read-Write private
Read-Only public
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Set Manager P[r]ivilege
[Q]uit to previous menu
Figure 3-4: SNMP Management Configuration
Displays the entry number of a destination of transmitting traps.
Displays the status of SNMP manager.
Enable
Disable
Displays an access authorization of SNMP manager.
Read-Write
Read-Only
Displays the community name, which is configured currently.
Indicates that SNMP manager is enabled.
Indicates that SNMP manager is disabled.
Allows you to read and write.
Allows you to read, only.
24