Panasonic GA-ML Series Manual page 118

Press I (command) on the screen of the IGMP Snooping Configuration, and then
you can see "IGMP Snooping Configuration" as Figure 4-31.
PN262492 Local Management System
IGMP Snooping Configuration-> IGMP Snooping Configuration
IGMP Snooping Status
Unknown data limit
IGMP Enabled VID
VLAN ID Group IP Address Group Members
------- ---------------- ----------------------------------------------------
speed
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [I]GMP Snooping Status Set Static [M]ember Port Show Statistics [T]able
[C]lear unknown-data
Command>
Enter the character in square brackets to select option
Screen Description
IGMP Snooping Status
Unknown Data limit
IGMP Enabled VID
VLAN ID
Group IP Address
Group Members
: Disabled
: 128
:
Set IGMP [E]nabled VID
Set IGMP [S]nooping VLAN Show Multicast [R]outer
Set [U]nknown Data Limit [Q]uit to previous menu
Figure 4-31 B: IGMP Snooping Configuration
Displays the operation status of the IGMP snooping function.
Enabled The function of IGMP snooping is enabled.
Disabled The function of IGMP snooping is disabled (factory default
settings).
Designates the maximum number of group entries to learn from
unknown multi-cast data. The initial value is 128, and the range of set-
tings is from 1 to 1,024.
Displays the status of IGMP snooping per VLAN.
Displays the VLAN ID of the multi-cast group.
Displays the IP address of the multi-cast group.
Displays the port that belongs to the multi-cast group.
Show [F]ilter Table
118