Enable/Disable Individual Trap Menu - Panasonic GA-ML Series Manual

3.2.3.

Enable/Disable Individual Trap Menu

Press D (command) on the screen of the SNMP Trap Receiver Configuration, and
then you can see Enable/Disable Individual Trap Menu as the screen 2.7-7. You can
configure to send traps on this screen.
PNxxxxxx Local Management System
SNMP Trap Receiver Configuration -> Enable/Disable Individual Trap Menu
SNMP Authentication Failure :
Enable Link Up/Down Port:
Link Up Port Trap Contrl:
Link Down Port Trap Control :
PoE Trap Control:
Coldstart Trap Control:
Warmstart Trap Control:
-------------------------------- <COMMAND> -----------------------------------
Enable/Disable [A]uth Fail Trap
Add Link Up/Down Trap [P]orts
Delete Link Up/Down Trap P[o]rts
Enable/Disable Link [U]p Trap
Enable/Disable Link [D]own Trap
Enable/Disable Po[E] Trap
Enable/Disable [C]oldstart Trap
Enable/Disable [W]armstart Trap
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Figure 3-6: Enable/Disable Individual Trap Menu
Screen Description
SNMP Displays the configuration of enabling and disabling trap-transmission when fail-
Authentication ing to authenticate SNMP.
Failure
Enabled
Disabled
EnabledLink Displays the target port-number where traps are transmitted when the link condi-
Up/Down Port tion is changed. All the ports are set as the target of transmitting traps. (All the
ports are configured to the target of transmitting traps for the factory default
settings.
Link Up Port Displays the configuration of enabling and disabling the trap transmission when a
Trap Control port becomes link-up.
Enabled
Disabled
Link Down Port Displays the configuration of enabling and disabling the trap transmission when a
Trap Control port becomes the link-down.
Enabled
Disabled
PoE Displays the configuration of enabling and disabling traps during the power sup-
Trap Control ply of PoE.
Enabled
Disabled
Disabled
1-xx
Disabled
Disabled
Disabled
Disabled
Disabled
Enables the trap-transmission.
Disables the trap-transmission (factory default settings).
Enables the trap-transmission.
Disables the trap-transmission (factory default settings).
Enables the trap-transmission.
Disables the trap-transmission (factory default settings).
Enables the trap-transmission.
Disables the trap-transmission (factory default settings).
28