Display Mac Address By Mac - Panasonic GA-ML Series Manual

3.6.4.

Display MAC Address by MAC

Press M (command) on the Forwarding Database Menu, and then you can see
"Display MAC Address by MAC" as Figure 3-19. This screen can display all of the
MAC address tables of this device.
PNxxxxxx Local Management System
Forwarding Database Menu -> Display MAC Address by MAC
Age-Out Time: 300 Sec.
MAC Address
-----------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Age-Out Time Displays the time to save a MAC address table. This indicates the time passed
after receiving the last (or the latest) packets. The factory default settings is 300
seconds (5 minutes).
MAC Address Displays a MAC address in a MAC address table.
Port Displays the port that a MAC address belongs to.
The following describes commands to be used on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P (command) to display the previous page.
A Configures the storage time of a MAC address.
Press A (command), and then the appearance ofthe command prompt becomes "Enter Age-
Out time>". Configure the time in the range from 10 to 1,000,000 (seconds).
Q Returns to the top menu.
Port
----
Figure 3-19: Display MAC Addresses by MAC
Set [A]ge-Out Time
[Q]uit to previous menu
54