Introduction - Panasonic GA-ML Series Manual

1. Introduction

After turning on the power of this device, it operates as a normal switching hub.
To use a function of SNMP management and the specific function, the configura-
tions such as a console port, Telnet, and SSH are needed. This part describes the
configuration of the device.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: You cannot access the device through Telnet and SSH if an IP address is not
configured. Configure the IP address (as minimum requirements [or conditions])
from a console port beforehand to access it. See section 3.1 regarding the configu-
ration of the IP address.
-------------------------------------------------------------------------------------------------------------------------------------------
6