Ipv4 Ping Execution - Panasonic GA-ML Series Manual

6.5.1.

IPv4 Ping Execution

Press 4 in the Ping Execution, and then you can see "IPv4 Ping Execution" as
Figure 6-8. This screen allows you to confirm the communication to a terminal and
other devices connected, by executing the IPv4 Ping command from a switch.
PNxxxxxx Local Management System
Ping Execution -> IPv4 Ping Execution
Target IP Address:
Number of Requests:
Timeout Value:
=============== Result ===================
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address
Set [N]umber of Requests
Set [T]imeout Value
Command>
Enter the character in square brackets to select option
Screen Description
Target IP Address
Number of Request
Timeout Value
Result
0.0.0.0
10
3 Sec.
[E]xecute Ping
[S]top Ping
[Q]uit to previous menu
Figure 6-8 A: IPv4 Ping Execution
The IP address of an opponent-destination to execute a Ping is displayed.
"0.0.0.0" is set to the factory default settings.
The number of operating Pings is displayed.
10 times are set to the factory default settings.
Displays the time until becoming time-out.
3 seconds is set to the factory default settings.
Displays the result of Ping.
188