Mstp Instance Configuration - Panasonic GA-ML Series Manual

4.4.5.

MSTP Instance Configuration

Press T (command) on the Multiple Spanning Tree Configuration menu, and then
you can see "MSTP Instance Configuration" as Figure 4-20. You can configure
the instance of a spanning tree on this screen.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> MSTP Instance Configuration
Instance VLANs Mapped
-------- ---------------------------------------------------------------------
0 1-4094
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[A]dd VLAN to MST Instance
Remove [V]LAN from MSTP Instance
[R]emove MST Instance
Command>
Enter the character in square brackets to select option
Screen Description
Instance Displays the MST instance ID.
VLANs Mapped Displays the VLAN ID associated with MST instance.
The following describes commands to be used on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P (command) to display the previous page.
A Add a VLAN ID to associate with the MST instance.
1. Press A (command), and then the appearance of the command prompt becomes "Enter
MSTP instance ID>". Enter the instance ID of target MST.
2. As the appearance of the command prompt becomes "Enter VLAN ID>", enter the
VLAN ID to associate.
V Deactivate (or deselect) the association between MST instance and VLAN ID.
1. Press V (command), and then the appearance of the command prompt becomes "Enter
MSTP instance ID>", enter the target MST instance ID.
2. As the appearance of the command prompt becomes "Enter VLAN ID>", enter the VLAN
ID to deactivate the association.
Figure 4-20: MSTP Instance Configuration
[M]ST Instance Configuration
MST Instance Port [C]onfiguration
MST Instance Topology [I]nformation
[Q]uit to previous menu
101