Basic Switch Configuration - Panasonic GA-ML Series Manual

3. Basic Switch Configuration

Press B (command) on the Main Menu, and then you can see the Basic Switch
Configuration menu as Figure 3-1. This screen allows you to configure the IP
address, SNMP, a port configuration, a spanning tree, and an access control (or
limitation).
You can configure the IP address, SNMP, and ports on this screen.
You can configure the IP address, SNMP, a port configuration, the power-saving
mode, and access-control on this screen.
PNxxxxxx Local Management System
Main Menu -> Basic Switch Configuration Menu
System [I]P Configuration
S[N]MP Configuration
[P]ort Configuration Basic
Port Configuration P[o]wer Saving
[S]ystem Security Configuration
[F]orwarding Database
[T]ime Configuration
A[R]P Table
[L]LDP Configuration
[Q]uit to Main Menu
Command>
Enter the character in square brackets to select option
Figure 3-1: Basic Switch Configuration Menu
Screen Description
System IP Configuration
SNMP Configuration
Port Configuration Basic
Port Configuration Power Saving
System Security Configuration
Forwarding Database
Time Configuration
ARP Table
LLDP Configuration
Quit to previous menu
Configures the network information for the IP address.
Implements the SNMP configuration.
Configures each port.
Implements the configuration of the power-saving mode.
Implements the configuration of the access-condition to this
device.
Displays a table of a MAC address.
Configures the function of time synchronization using SNTP,
and implements the time configuration by using a manual.
Displays an ARP table.
Implements the LLDP configuration.
Returns to the Main Menu.
20