System Ip Configuration - Panasonic GA-ML Series Manual

3.1. System IP Configuration

Press I (command) on the Basic Switch Configuration menu, and then you can see
the System IP Configuration Menu as Figure 3-2. You can configure "the IP address
of this device" on this screen.
PNxxxxxx Local Management System
Basic Switch Configuration -> System IP Configuration Menu
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
DHCP Mode:
-------------------------------- <COMMAND> -----------------------------------
Set [I]P Address
Set Subnet [M]ask
Set Default [G]ateway
Set IP P[a]rameter
Set [D]HCP Status
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
MAC Address Displays the MAC address of this device. This cannot be changed by the unique
value on each device.
IP Address Displays the IP address that is configured currently. As nothing is set to the factory
default settings, 0.0.0.0 is displayed on the screen.
Subnet Mask Displays the subnet mask that is configured currently. As nothing is set to the
factory default settings, 0.0.0.0 is displayed on the screen.
Default Displays the IP address of the router as the default gateway, which is configured
Gateway currently. As nothing is set to the factory default settings, 0.0.0.0 is displayed on
the screen.
DHCP Mode Displays if the mode is configured to require the DHCP server and obtain the IP
address during the startup. The factory default settings is Disabled.
Enabled
Disabled
00:50:40:xx:xx:xx
192.168.1.10
255.255.255.0
0.0.0.0
Disabled
Figure 3-2: System IP Configuration
Requires the DHCP server to obtain the IP address during the start
up.
Does not require to obtain the IP address on the DHCP server
during the start up.
21