System Log - Panasonic GA-ML Series Manual

6.6. System Log

Press L on the Switch Tools Configuration menu, and then you can see System Log
Menu as Figure 6-12. The event that occurred in the switch is displayed on this
screen. History of events, which occurred in the switch, is displayed. See the event
to figure out the phenomenon, which occurs in the switch, and this is helpful to
manage (or control) the network.
PNxxxxxx Local Management System
Switch Tools Configuration -> System Log Menu
Entry Time(YYYY/MM/DD HH:MM:SS)
----- ------------------- --------------------------------------------------
1 2001/01/24 05:08:53 Port-1 link-up
2 2001/01/24 05:08:54 Port-1 link-down
3 2001/01/24 05:08:58 Port-1 link-up
4 2001/01/24 05:11:47 Login from console
5 2001/01/24 05:13:31 Port-1 link-down
6 2000/12/31 00:01:15 Login from console
7 2000/12/31 00:02:28 Port-1 link-up
8 2000/12/31 00:13:20 Set IP address <172.16.222.1>
9 2000/12/31 00:23:01 Reboot: Normal
10 2000/12/31 00:23:55 Port-1 link-up
-------------------------------- <COMMAND> -----------------------------------
[P]revious Page
[N]ext Page
[C]lear System Log
[S]elect Entry Log number
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Entry Displays the event number.
Time
Displays time when event occurs. If the time is not set
launching (or activating).
Event Displays the event content, which occurs in the switch.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: An event is deleted from the older record (or information) of it, sequentially.
-------------------------------------------------------------------------------------------------------------------------------------------
The following describes commands to be used on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P (command) to display the previous page.
C Deletes all of the log contents.
Press C (command) to delete all the logs
Figure 6-12: System Log
.
192
Event
,
the
total time is displayed from