Panasonic GA-ML Series Manual page 73

The following describes commands to be used on this screen.
V Configures VLAN ID.
Press V (command), and then the appearance of the command prompt becomes "Enter
VLAN ID >". After that, enter a new VLAN ID.
N Configures VLAN name.
Press N (command), and then the appearance of the command prompt becomes "Enter
VLAN name >". After that, enter a new VLAN name using half-size characters: within 32
characters.
A Configures VLAN.
Press A (command) to apply the VLAN created.
Q Returns to the top menu.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: Press A to apply for sure after entering the VLAN configuration. If you Press Q"
without applying, the configuration becomes discarded (or deleted) and no VLAN is
created.
-------------------------------------------------------------------------------------------------------------------------------------------
73