Statistics Menu - Panasonic GA-ML Series Manual

5. Statistics Menu

Press S on the Main Menu, and then you can see the Statistics Menu as Figure 5-1.
This screen allows you to monitor the number of packets as the statistical
information on the switch. Doing so allows you to figure out the network condi-
tion. In addition, monitoring error packets enables to isolate the failure.
PNxxxxxx Local Management System
Main Menu -> Statistics Menu
Port: 1
<Counter Name>
Total RX Bytes
Total RX Pkts
Good Broadcast
Good Multicast
CRC/Align Errors
Undersize Pkts
Oversize Pkts
Fragments
Jabbers
Collisions
64-Byte Pkts
65-127 Pkts
128-255 Pkts
256-511 Pkts
512-1023 Pkts
Over 1024 Pkts
-------------------------------- <COMMAND> -----------------------------------
[N]ext [P]revious [S]elect Port Re[f]resh Mode Since [R]eset [Q]uit
Command>
Enter the character in square brackets to select option
Screen Description
Port
Refresh
Elapsed Time Since
System Up
Counter Name
Total
Avg./s
The following describes commands to be used on this screen.
S Switches the target port.
Press S (command), and then the appearance of the command prompt becomes "Select
port-number>". Enter the port-number to be displayed.
N Displays the value of the next port.
Press N (command), and then a counter of the next port is displayed.
P Displays the value of the previous port.
Press P (command), and then a counter of the previous port is displayed.
Refresh: 300 Sec.
<Total>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Figure 5-1 A: Statistics Menu
Displays the port-number.
Displays the update interval of the screen (The factory default settings: 300
seconds).
Displays the time of starting this device.
Displays the name of each counter.
Displays the value of each counter.
Displays the mean value for one second of each counter.
Elapsed Time Since System Up: 000:00:18:16
<Avg./s>
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
175