Mode
Displays the configuration status of full or half duplex, and the communication
speed. Every mode is set to "Auto" for the factory default settings.
Auto
100-FDx(100F)
100-HDx(100H)
10-FDx(10F)
10-HDx(10H)
Power-Saving
Displays the status of the power-saving mode. Every power saving is configured
to "Half" for the factory default settings.
Half
Full
Disabled
EEE(802.3az)
Displays the status of EEE(Energy Efficient Ethernet). "Disabled" is configured to
a factory default settings.
Enabled
Disabled
The following describes commands to be used on this screen.
N
Displays the next page.
Press N (command) to display the next page.
P
Displays the previous page.
Press P (command) to display the previous page.
S
Configures the power-saving mode of each port.
1. Press S (command), and then the appearance of the command prompt becomes "Select
port number to be changed>". After that, enter the port-number to be changed.
2. Press 0 when changing all the ports simultaneously.
3. The appearance of the command prompt becomes "Enter Power Saving mode for port
(F/H/D)>". Press E to enable, and D to disable.
4.
Press H to configure the power saving mode that prioritizes the connectivity with other
devices. After completing the configuration, the display on the upper side is updated.
E
Configures EEE of each port.
1. Press E (command), and then the appearance of the command prompt becomes "Select
port-number to be changed>". After that, enter the port-number to be changed. Press 0
to change all the ports at once.
2. The appearance of the command prompt becomes "Enable, Disable for Energy Efficient
Ethernet (EEE 802.3az). Then press E to enable and D to disable.
Q
Returns to the top menu.
Auto negotiation mode
100Mbps full duplex
100MBps half duplex
10Mbps full duplex
10MBps half duplex
Displays that the status of the power-saving mode is enabled
(half).
Displays that the status of the power-saving mode is enabled
(Full).
Displays that the status of the power-saving mode is disabled.
Displays the status of EEE (Energy Efficient Ethernet).
Displays that the EEE status is disabled.
35