Regional Topology Information - Panasonic GA-ML Series Manual

4.4.10. Regional Topology Information

Press G on the Multiple Spanning Tree Configuration menu, and then you can see
"Regional Topology Information" as Figure 4-25. This screen displays the configu-
ration information on a spanning tree per port.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> Regional Topology Information
Port Trunk Link Cist Port Regional Root
---- ----- ---- -----------------------
1 ---
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
8 ---
9 ---
10 ---
11 ---
12 ---
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
Command>
Enter the character in square brackets to select option
Screen Description
Port
Trunk
Link
Cist Port Regional Root
Cist Port Regional Path Cost
The following describes commands to be used on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P (command) to display the previous page.
Q Returns to the top menu.
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
Down 8000 0050405C266E
[P]revious Page
Figure 4-25: Regional Topology Information
Displays the port-number.
If a trunking is configured, the group number (key) of the trunking
is displayed.
Displays a link condition.
UP Indicates the condition that the link is normally
established.
DOWN Indicates the condition that the link is not established.
Displays the ID of a root bridge.
Indicates the cost, which is being transmitted.
Cist Port Regional Path Cost
----------------------------
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
[Q]uit to previous menu
108