Port List Creation Menu - Panasonic GA-ML Series Manual

4.9.3.

Port List Creation Menu

Press C (command) on the Port List Configuration menu, and then you can see Port
List Creation Menu as Figure 4-42. You can configure and delete the port-number
to operate a PoE scheduler on this screen.
PNxxxxxx Local Management System
Port List Configuration -> Port List Creation Menu
Port List Index
Port Members
-------------------------------- <COMMAND> -----------------------------------
Set Port List [I]ndex
[A]pply Port List
Command>
Enter the character in square brackets to select option
Screen Description
Port List Index Delete the Index number of the port list.
Port Members Delete the port-number belonging to the port list.
The following describes commands to be used on this screen.
I Configures the Index number of a port list.
Press I (command), and then the appearance of the command prompt becomes "Enter Port
List index >". Enter the Index number of the port-number.
L Configures the port-number belonging to the port list.
Press L (command), and then the appearance of the command prompt becomes "Enter
port-number >". Enter the port-number belonging to the port list.
A Applies the content configured. Press Q" without applying, and then the configuration is
deleted.
Q Returns to the top menu.
:
:
Set Port [L]ist
[Q]uit to previous menu
Figure 4-42: Port List Creation Menu
139