Panasonic GA-ML Series Manual page 135

Screen Description
Power Budget Displays the power supply that this device can operate (or supply).
Power Displays the value of power supply that this device supplies.
Consumption
Power Usage Displays the threshold value of power supply to transmit traps.
Threshold for Displays that The factory default settings is "50%".
Sending Trap
Power Displays the method of power-supply when the supply exceeds the Power Bud-
Management get. The factory default settings is "Deny next port connection, regardless of
Method priority".
Deny next port connection,
regardless of priority
Low priority port will be
shut down
The following describes commands to be used on this screen.
U Sets the threshold value to transmit (or send) traps.
Press U (command), and then the appearance of the command prompt becomes "Enter
power usage threshold>". Enter the threshold value to transmit Trap.
M Configures the method to manage the power supply.
Press M (command), and then the appearance of the command prompt becomes "Enter
the power management method>". Select the method to manage, and then enter it. Shut
down those with a low priority, and then Press 0 to supply for the newly connected ones.
Press 1 if you do not supply to the physical object (or hardware) connected to the next
hardware, regardless of the Priority value. The power supply to the port with the higher
port-number stops, in the case of the same priority.
Q Returns to the top menu.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: Connect the power receiver of PoE compatible with IEEE802.3at, which con-
sumes more than 15.4W additionally, on the condition that the amount of power sup-
ply is lower than 354.5W. If the amount of power supply exceeds 370W, the power
supply becomes stopped for the lower-priority port always, regardless of the configu-
ration of the Power Management Method. The power supply for the port with the
higher port-number stops in the case of the same priority.
-------------------------------------------------------------------------------------------------------------------------------------------
Stops supplying (or feeding) power for the port
connected right before that Power Budget
exceeds.
Stops supplying power for the port of the lowerst
priority. If the priority is the same, the power sup-
ply for the port with the higher port-number
becomes stopped.
135