Pps Neighbor Table - Panasonic GA-ML Series Manual

4.12.4. PPS Neighbor Table

Press G (command) on the screen of the PPS Configuration, and then you can see
"PPS Neighbor Table" as Figure 4-56. You can refer to and configure the PPS
neighbor table, on this screen.
PNxxxxxx Local Management System
PPS Configuration -> PPS Neighbor Table
Neighbor Age-Out Time: 60 seconds
Total Entries: 2
MAC Address
----------------- ---- -------
xx:xx:xx:xx:xx:xx 10
xx:xx:xx:xx:xx:xx 2
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set Neighbor Age-Out [T]ime
Command>
Enter the character in square brackets to select option
Screen Description
Neighbor Displays the holding (or retention) time for PPS Neighbor entry. Entries without
communication, which exceeds the storing time configured, are deleted from the table. The
Age-Out Time
factory default settings is 60 seconds.
Total Entries Displays the number of entries for PPS Neighbor.
MAC Address Displays the MAC address of PPS Neighbor.
Port Displays the port-number to be used for the communication with PPS Neighbor.
Expired This describes the time needed to delete the entry registered in the Neighbor table.
Port Expired
52
57
Figure 4-56 A: PPS Neighbor Table
168
[D]elete PPS Neighbor Entry
[S]how Neighbor Info Detail
[Q]uit to previous menu