Watch Dog Timer - Panasonic GA-ML Series Manual

6.7. Watch Dog Timer

Press W on the Switch Tools Configuration menu, and then you can see Watch Dog
Timer Menu as Figure 4-23. You can implement the operation (or motion) configu-
ration of the function of Watch Dog Timer on this screen.
PNxxxxxx Local Management System
Switch Tools Configuration -> Watch Dog Timer Menu
Watch Dog Timer:
-------------------------------- <COMMAND> -----------------------------------
Set [W]atch Dog Timer
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Watch Dog Timer
The following describes commands to be used on this screen.
W Switches the operation condition of Watch Dog Timer.
Press W (command), and then the appearance of the command prompt becomes "Enabled
or Disabled Watch Dog Timer(E/D)>". After that, Press E to enable the function and D to
disable it.
Q Returns to the top menu.
Disabled
Figure 4-23: Watch Dog Timer
Displays the status for the function of a Watch Dog Timer.
The factory default settings is "Disabled".
Enabled The function is enabled.
Disabled The function is disabled.
194