N
Displays the next page.
Press N (command) to display the next page.
P
Displays the previous page.
Press P (command) to display the previous page.
A
Configures the PPS priority on the port specified (or designated).
Press A (command), and the command prompt becomes "Enter port-number>". Enter the
port-number to specify. After entering, the display shows "Enter PPS Priority #>". Enter
the priority to set in the range from 0 to 255. The higher the value is, the higher the priority
will be. The factory default settings is 128.
Q
Returns to the top menu.
167