Led Base Mode Configuration - Panasonic GA-ML Series Manual

3.5.5.

LED Base Mode Configuration

Press B (command) on the screen of the System Security Configuration, and then
you can see the LED Base Mode Configuration as Figure 3-14. You can configure
the LED base mode on this screen.
PNxxxxxx Local Management System
System Security Configuration -> LED Base Mode Configuration
Exception Handler:
-------------------------------- <COMMAND> -----------------------------------
Set LED [B]ase Mode
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Exception Displays the current LED base mode.
Handler The status mode (Status) is configured to the factory default settings.
Status
Eco
The following describes commands to be used on this screen.
B Changes LED base mode.
Press B (command), and then the appearance of the command prompt becomes "Select
LED Base Mode (S/E)>". After that, Press E when changing to the ECO mode, and S when
changing the LED base.
Q Returns to the top menu.
Status
Figure 3-14: LED Base Mode Configuration
Displays (or shows) that it is in operation as the status mode.
Displays that it is in operation as the ECO mode.
48