Snmp Configuration - Panasonic GA-ML Series Manual

3.2. SNMP Configuration

Press N (command) on the Basic Switch Configuration menu, and then you can see
the SNMP Configuration menu as Figure 3-3. You can configure as SNMP agent on
this screen.
PNxxxxxx Local Management System
Basic Switch Configuration -> SNMP Configuration Menu
SNMP [M]anagement Configuration
SNMP [T]rap Receiver Configuration
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
SNMP
Implements (or performs) the configuration of SNMP manager.
Management
Configuration
SNMP Implements the configuration of transmitting SNMP traps.
Trap Receiver
Configuration
Quit to Returns to the top menu.
Previous Menu
The following describes commands to be used on this screen.
M Implements the configuration of SNMP manager.
Press M, and then the screen moves to the SNMP Management Configuration menu.
T Configures the trap-transmission.
Press T, and then the screen moves to the SNMP Trap Receiver Configuration menu.
Q Ends the SNMP Configuration menu to return to the top menu.
Figure 3-3: SNMP Configuration
23