Table of Contents
Advertisement
The following describes commands to be used on this screen.
X
Configures to enable or disable the function of the exception handling.
Press X (command), and then the appearance of the command prompt becomes "Enable or
Disable Exception Handler (E/D)>". After that, press E to enable the function and D
otherwise.
M Configures the method of exception-handling.
Press M (command), and then the appearance of the command prompt becomes "Select
Exception Handler Mode (M/R/B)>". After that, press M to display a debug message, R to
reboot, and B to implement both of them.
Q
Returns to the top menu.
186
Advertisement
Table of Contents
