Panasonic GA-ML Series Manual page 41

A Configures an IP address to allow. Five ranges can be configured.
1. Press A (command), and then the appearance of the command prompt becomes "Enter
IP address entry number>". After that, enter the entry number in the range from 1 to 5.
2. The appearance of the command prompt becomes "Enter IP address>". Then enter
the IP address, which is allowed to access.
3. If an IP address is correct, the appearance of the command prompt becomes "Enter
subnetwork mask>". After that, enter a mask in the range of IP address, which is
allowed to access.
Configuration Example:
No. IP Address
--- ------------------
1 192.168.1.10
2 192.168.1.20
3 192.168.2.1
4 192.168.3.1
D Deletes the range of an IP address configured.
Press D (command), and then the appearance of the command prompt becomes "Enter IP
address entry number>. After that, enter the entry number to delete.
M Changes the range of an IP address configured.
1. Press M (command), and then the appearance of the command prompt becomes
"Enter IP address entry number>". After that, enter the entry number in the range
from 1 to 5.
2. The appearance of the command prompt becomes "Enter IP address>". Then enter an
IP address configured.
3. The appearance of the command prompt becomes "Enter subnet mask>". Then enter
the range of the IP address, which is allowed to access with a mask.
Q Returns to the top menu.
Subnet Mask IP address allowed to access
-------------------------- --------------------------------------------------
255.255.255.255 192.168.1.10
(Only one machine is accessible).
255.255.255.254 192.168.1.20、192.168.1.21
(Two machines are accessible.)
255.255.255.128 From 192.168.2.1 to 192.168.2.127
(127 machines are accessible.)
255.255.255.0 From 192.168.3.1 to 192.168.3.254
(254 machines are accessible.)
41