Lldp Configuration - Panasonic GA-ML Series Manual

3.9.2.

LLDP Configuration

Press L (command) on the Basic Switch Configuration menu, and then you can see
"LLDP Configuration" as Figure 3-26. You can perform LLDP configuration on this
screen.
PNxxxxxx Local Management System
Basic Switch Configuration -> LLDP Configuration
LLDP Status : Disabled
Port Admin Status Port Desc Sys Name Sys Desc Sys Cap
---- ------------ --------- -------- -------- -------- ---------
1 Both
2 Both
3 Both
4 Both
5 Both
6 Both
7 Both
8 Both
9 Both
10 Both
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
LLDP Status Displays the configuration to enable or disable LLDP.
Enabled
Disabled
Port Display the port-number.
Admin Status Displays the LLDP status.
TX Only
RX Only
Both
Disabled
Port Desc Displays if the interface information is included in the LLDP frame.
Enabled
Disabled
Sys Name Displays if the host name is included in the LLDP frame.
Enabled
Disabled
Sys Desc Displays if the overview of system information is included in the LLDP frame.
Enabled
Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
Disabled Disabled Disabled Disabled Disabled
[S]et LLDP Status
[L]LDP Port Admin Status
Figure 3-26: LLDP Configuration
Enables LLDP (factory default settings).
Disables LLDP.
Transmits LLDP, only.
Receives LLDP, only.
Transmits and receives LLDP (factory default settings).
Does not transmit and receive LLDP.
Includes in the LLDP.
Does not include in the LLDP (factory default settings).
Includes in the LLDP.
Does not include in the LLDP (factory default settings).
Includes in the LLDP.
Does not include in the LLDP (factory default settings).
64
Mgmt Addr
Enable/Disable TL[V]
N[e]ighbor Table