Table of Contents
Advertisement
[Setup via recorder's main monitor]
Set up matching area [Setup area]
Set up to 4 areas for matching face images while displaying live images. At the default, the whole area on the
camera images is set to match face images. By designating the matching areas, it is possible to reduce the
operation failure.
Step 1
Click the [Setup area >] button (☞ Page 12) on the
face image registration window.
→ The window for setting up the matching area will
be displayed. The portion where the camera
detected a matching face will be displayed within
a green frame in the image display area. (The
frame will be updated every second.)
Step 2
Click the [Fix area] button next to the respective
matching area. A maximum of 4 matching areas can
be registered to allow for polygonal shapes.
Configure the settings of the statistical processing [Statistics]
Configure the area settings to enhance the accuracy of the statistical processing and save the statistical pro-
cessing data on a USB medium. Only the administrator and users of an allowed level can configure the set-
tings. (☞ operating instructions of the recorder)
[Accumulate statistics data]
Select whether or not to execute the statistical pro-
cessing (data accumulation) of the face detection
results. The statistical processing will not be exe-
cuted in the period that is set to "Off", and the statis-
tics data will not be accumulated or displayed on the
graph.
Off: Does not execute the statistical processing.
On: Executes the statistical processing.
Default: Off
Step 3
On the displayed image, click the top left corner and
bottom right corner of the square that will become
the area.
→ The designated portion will be displayed in gray
and registered as a matching area.
If even part of the green frame is overlapped with
the matching area, the portion within a green
frame will be targeted for the face matching func-
tion.
Note:
• As the Matching areas will be set up to match the
image display area divided into 16×16 segments,
the top left and bottom right detection areas may
not be exactly as designated.
• To delete a registered area, click the [Delete area]
button for the matching area to delete.
Step 4
To complete the settings, click the [Back] button.
→ The screen returns to the face image registration
window.
[Usage pattern]
Refer to [Usage pattern] (☞ Page 11) of "Set up
face matching alarm".
14
Advertisement
Table of Contents
