Table of Contents
Advertisement
1.
From the Go Online menu, press NEXT until the Set Voice Parameters menu appears.
2.
Press OK to advance to the Set Voice Coder menu.
3.
Press NEXT until the Set Silence Detect menu appears.
4.
Press OK to access this menu. Depending on the current setting this menu will either display Enable
Silence Det. or Disable Silence Det. Select No to abort changing the current setting or select OK to
change the setting to the displayed value.
EXTender 3000 System Administrator's Guide (Definity)
Remote Module Configuration
Page 57
Advertisement
Table of Contents
