Setting Stop Bits; Configuring Ppp (Ethernet Only); Configuring Bridging (Ethernet Only) - MCK EXTender 3000 System Administrator Manual

Setting Stop Bits

To change Stop Bits select Stop Bits menu item from COM1 menu.
1. Highlight the Stop Bit format you want.
2. Press Enter. Your options are 1 or 2 stop bits. When you make your selection, you return to the COM1
menu.
Note: To use the COM port for simultaneous data access, you must make sure that the COM port set-
tings for your Remote Module, remote PC, Office Module, and data communications server all match.

Configuring PPP (Ethernet Only)

Please refer to the "Data Communications"

Configuring Bridging (Ethernet Only)

Please refer to the "Data Communications"
EXTender 3000 System Administrator's Guide (Definity)
Configuring the Office Module
section of this guide for details on PPP configuration.
section of this guide for details on Bridging configuration.
Page 31