Stratasys J850 User Manual page 145

Stratasys J850/J835 User Guide
9. In the following screen, confirm the items in the wizard screen, and click
10. When the printing is done, and click Next.
11. When the following screen appears, continue as follows:
DOC-18001 Rev. H
Next.
Figure 4-178 Confriming transparency readiness
A test pattern is printed on the transparency. This takes approximately 10
minutes.
❒ To enter the correction values, select Enter the correction values
now and click Next. Continue below.
❒ To enter the values at a later time, select Exit wizard now. Enter
correction values later and click Next. The Wizard Complete screen
appears. Click Done to exit.
Figure 4-179 Conitue or exit selection screen
This completes the first part of the process.
4 Operating and Maintaining the Printer
4-117