Stratasys J850 User Manual page 77

Stratasys J850/J835 User Guide
8. Clean the orifice plates, with a back-and-forth motion. Use the mirror to
Once a month, remove and clean the print-head splash shield. (See step 4
on page 4-63.)
9. Using the supplied cleaning sponge, clean the glass lens on both UV lamps
10. Using the alcohol-soaked cleaning cloth, remove any material remaining on
11. Remove any pieces of waste material collected in the purge unit. If
DOC-18001 Rev. H
make sure that you have removed all of the residue material.
Figure 4-58 Cleaning the heads
.
the wiper and the surrounding area.
necessary, remove the waste collector to clean it. Wipe the rubber seal.
Figure 4-59 Removing the purge unit waste collector
4 Operating and Maintaining the Printer
4-49