Stratasys J850 User Manual page 133

Stratasys J850/J835 User Guide
2. Start the UV Lamp Replacement wizard from the Options menu.
3. Make sure that the build tray is empty, and confirm this in the wizard
4. Select the UV lamp(s) to be replaced and click Next.
DOC-18001 Rev. H
Figure 4-155 Selecting the UV Lamp Replacement wizard
screen. Then, close the printer, and click Next.
Figure 4-156 Tray confirmation
The axes move to the "home" position.
Figure 4-157 UV lamp selection screen
4 Operating and Maintaining the Printer
4-105