Stratasys J850 User Manual page 69

Stratasys J850/J835 User Guide
If there is a maintenance task due, this is indicated on the main interface
screen.
Figure 4-47 Maintenance Required indicator
If this indicator appears, you can display the Maintenance Counters screen by
clicking on it.
Figure 4-48 Maintenance Counters screen
The Maintenance Required indicator appears by default for most operator-
performed maintenance tasks. The check box under "User Warning"
controls whether or not it appears when a particular task is due.
For maintenance tasks that are controlled by wizards, the dates and printing
times are reset automatically when the relevant wizard is run and completed
successfully. Manual maintenance tasks (for example, roller inspection and
DOC-18001 Rev. H
4 Operating and Maintaining the Printer
4-41