Stratasys J850 User Manual page 39

Stratasys J850/J835 User Guide
6. Make sure that the print block is in the left rear corner of the printer.
Caution:
Moving the print block manually induces an electrical current that can
damage components. Move the print block slowly to minimize the current
and reduce the risk of damage.
7. Close the printer cover and click Lock Door.
8. Click Home.
9. Click Goto.
10. Make sure that the Units are set to Steps.
DOC-18001 Rev. H
Figure 4-11 Print block in the left rear corner
The build tray moves to its Home position.
The build tray moves to the saved tray height start poistion.
Figure 4-12 Setting the initial tray height
4 Operating and Maintaining the Printer
4-11