Stratasys J850/J835 User Guide
8. Make sure that the build tray is clear and clean, and confirm this in the
9. When the following screen appears, open the printer and tape a sheet of
DOC-18001 Rev. H
wizard screen.
Figure 4-90 Preparing for head optimization (1)
When you click Next, a frame is printed on the build tray.
pink paper to the surface left of the build tray.
Figure 4-91 Preparing for head optimization (2)
When you click Next, the Pattern Test is printed on the pink paper.
4 Operating and Maintaining the Printer
4-67