Stratasys J850 User Manual page 112

Stratasys J850/J835 User Guide
4. Make sure that the build tray is empty. Confirm this in the wizard screen and
➢ When using a Stratasys UV sensor box that you connect to the printer
➢ When using a stand-alone UV radiation meter, continue with "External UV
DOC-18001 Rev. H
click Next.
Figure 4-121 Printer preparation
(TOL-03005-S), continue with "UV Sensor Connected to Printer" on the
next page.
Meter" on page 4-87.
4 Operating and Maintaining the Printer
4-84