Stratasys J850/J835 User Guide
3. Click Next.
4. In the Cartridge positioning screen, make sure that the material cartridges
5. Click Start.
6. When the Wizard Completed screen appears, click Done.
DOC-18001 Rev. H
Figure 4-140 Material Replacement Options selection
are properly positioned.
Note: The time needed to complete this process depends on the materials
currently loaded in the printer. The estimated time is displayed at the bottom
of the Cartridge positioning screen.
The wizard fills both channels of each print head with the selected material.
After the printer-control application restarts, you can print.
4 Operating and Maintaining the Printer
4-95