Stratasys J850 User Manual page 165

Stratasys J850/J835 User Guide
3. Soak a micro-fiber cloth in the solution.
4. Thoroughly wet the surface with the cloth. Do not wipe!
5. Rinse the cloth with clean water.
6. Absorb the solution from the acrylic surface with the cloth, without applying
7. If necessary, repeat to remove any remaining marks, or apply clean water
8. If the surface is still wet, you can dry it with a clean, micro-fiber cloth by
If convenient, you can apply the cleaning solution and water to the acrylic
surfaces with a spray bottle instead of with the cloth.
DOC-18001 Rev. H
Do not use paper towels, which can cause scratch marks.
pressure.
to rinse the surface.
gently wiping in one direction.
4 Operating and Maintaining the Printer
4-137