Stratasys J850 User Manual page 137

Stratasys J850/J835 User Guide
12. Twist the tube by 180° (a), and continue to insert the UV lamp bulb into the
13. Use the UV lamp clamp to insert the lamp into place in the UV reflector.
14. Using a 2.5-mm hex key, secure the clamp to the UV reflector, and continue
DOC-18001 Rev. H
UV reflector (b).
Figure 4-165 Twisting the tube and inserting the UV lamp
Figure 4-166 Pushing the UV lamp into place
with step .
25
Figure 4-167 Attaching the UV lamp clamp
4 Operating and Maintaining the Printer
4-109