Stratasys J850 User Manual page 140

Stratasys J850/J835 User Guide
20. In the wizard screen, confirm that you have replaced the UV lamp(s) and
DOC-18001 Rev. H
that the black strip is attached, then click Next.
Figure 4-171 UV-installation confirmation
The wizard operates the UV lamps and checks if their power is within the
acceptable range for each printing mode.
Note: The mode currently being checked appears in the lower-left corner
of the printer interface.
Figure 4-172 Status during UV lamp check
4 Operating and Maintaining the Printer
4-112