Stratasys J850/J835 User Guide
To clean the printer components:
1. Prepare—
2. Start the Cleaning wizard from the Options menu.
3. Make sure that the build tray is clear (empty), and close the cover. Confirm
DOC-18001 Rev. H
❒ 90% isopropanol (IPA—isopropyl alcohol) or ethanol (ethyl alcohol)
❒ disposable cleaning gloves
❒ a supplied 3M sanding sponge
❒ a supplied cleaning cloth or equivalent
❒ a mirror
Figure 4-55 Options > Wizards menu
this in the wizard screen and click Next.
Figure 4-56 Preparation check
The printer moves components to the cleaning position.
4 Operating and Maintaining the Printer
4-47