Stratasys J850 User Manual page 15

Stratasys J850/J835 User Guide
Circuit Breaker
UV-Lamp Overheating
Protection
Grounded Chassis
If the printer is not used as specified in this guide, these safety features may not
provide adequate protection.
DOC-18001 Rev. H
Figure 2-1 Front view of the printer
The power to the printer is turned off in case of electrical
overcurrent.
Note: The circuit breaker is only accessible to service
personnel.
The power supplied to the UV lamp and the motion motors is
turned off if the temperature around the lamp reaches 90°C
(194°F). A label on the UV-lamp cover indicates if the
temperature has exceeded 65°C (150°F).
The chassis of the printer is grounded, to prevent electrical
shock.
Note: The power outlet must be grounded in accordance with
the local electric code to provide this protection.
2 Safety
2-3