Stratasys J850 User Manual page 108

Stratasys J850/J835 User Guide
22. In the Replace print heads screen, select the check box to confirm that you
23. With your fingers, make sure that the new head is level and even with the
24. Confirm that the heads are level by selecting the check box in the following
DOC-18001 Rev. H
have replaced the head(s), and click Next.
Figure 4-113 Head replacement confirmation
other heads.
Figure 4-114 Checking the level of the new head
wizard screen, and click Next.
Figure 4-115 Installation-check screen
4 Operating and Maintaining the Printer
4-80