Stratasys J850 User Manual page 146

Stratasys J850/J835 User Guide
Scanning the Transparency
After printing the test pattern on a transparency, you scan it twice. In addition,
you scan the reference (grid) transparency twice.
Use the scanner currently recommended by Stratasys.
The illustrations in this section show the Canon CanoScan LiDE 400
interface.
If you need to install the software for this scanner, download it from:
https://www.canon.co.uk/support/consumer_
products/products/scanners/lide_series/canoscan-lide-
400.html?type=drivers&language=&os=windows%2010%20(64-bit)
For convenience, the scanner should be connected to the computer running
GrabCAD Print.
To scan the transparency:
1. On the computer connected to the scanner, open the scanner utility.
2. In the opening screen, select ScanGear.
DOC-18001 Rev. H
Figure 4-180 Scanner icon
Figure 4-181 Scanning selection
4 Operating and Maintaining the Printer
4-118