Stratasys J850 User Manual page 152

Stratasys J850/J835 User Guide
Analyzing the Transparencies
After scanning the test pattern and the reference grid, you analyze them in the
Color Uniformity Utility, and the pixel correction values are calculated.
To analyze the scanned transparencies:
1. Open the Color Uniformity Utility installed on the GrabCAD Print computer.
2. Click Load Images and double-click one of the scanned images in the
3. Click Run to analyze the files.
4. When the analysis is complete, the results are displayed in the following
DOC-18001 Rev. H
folder. You can select any one of the JPG images. Once you select an
image, the utility uploads all four (4) JPG images of the scans you saved.
Figure 4-188 Color Uniformity Utility screen
screen.
Figure 4-189 Enter Pixel Correction screen in utility
The results file is saved in the same folder as the scanned JPG files. This
folder also contains a log file and the analysis of each scan.
4 Operating and Maintaining the Printer
4-124