Stratasys J850 User Manual page 32

Stratasys J850/J835 User Guide
2. After the printer-control computer boots, log in to Windows and launch the
A HASP plug containing a valid product activation key is required on the
printer computer. This is supplied during printer installation or upgrade. If
the application does not open and a HASP message appears, contact your
Stratasys dealer or service provider.
All monitoring and controlling of the printer is done from this interface.
Figure 4-3 Printer interface
DOC-18001 Rev. H
The main power switch turns on the J850/J835 printer, which includes the
built-in computer.
printer-control program:
❒ On the printer-computer desktop, double-click the J850/J835 printer
icon.
or—
❒ From the Windows Start menu, select (All) Programs > Objet >
J850/J835.
4 Operating and Maintaining the Printer
4-4