Stratasys J850 User Manual page 78

Stratasys J850/J835 User Guide
Note: When returning the waste collector to the purge unit, make sure to insert
it as shown.
12. Inspect the wiper.
13. Select the confirmation check boxes in the wizard screen (see Figure 4-57)
14. Activate the roller, so that it rotates while you clean it.
15. With a cleaning cloth soaked with alcohol, clean the roller surface, as it is
Caution
Use caution when cleaning the rotating roller. Use a cleaning cloth or the
supplied UV sanding sponge.
DOC-18001 Rev. H
If the wiper is scratched, torn or worn, or if you cannot clean it completely,
replace it.
a. Grasp it and pull it up and out of its bracket.
b. Insert the new wiper blade, making sure that it is straight and secured
well on both sides.
and click Next.
Figure 4-60 Roller-rotation activation
rotating.
4 Operating and Maintaining the Printer
4-50