Table of Contents
Advertisement
Step 3: Back Wall Assembly
Part 4
L: Place 1 (9373) Balluster in each of the notches in (9366) Narrow Mid Cross Back and (9451) Cross Support
Middle Short, making sure they are flush. Attach using 4 (S30) #8 x 1- 1/16" Wood Screws per board. (fig. 3.9 and
3 .10)
M: Check to ensure that the assembly is square, then install 10 (S30) #8 x 1- 1/16" Wood Screws into the
locations shown in fig.3.6 securing the (9366) Narrow Mid Cross, (9451) Cross Support Middle Short and the
(9372) Cross Frame. (fig 3.9 and 3.11)
N: Tighten all bolts .
Fig. 3.9
Fig. 3.11
S30
Wood Parts
3 x
Balluster 5/8 x 2-1/2 x 36-29/32"
9373
x 22
S30
9451
9372
22 x
#8 x 1-1/16" Wood Screw
S30
Fig. 3.10
9373
9366
9373
Hardware
27
S30
Advertisement
Table of Contents
