Table of Contents
Advertisement
Step 19: Back Wall Frame Assembly
A: Attach (1912) Back Divider to (1913) Back Floor with 1 (H2) 1/4 x 2" Hex Bolt (with lock washer, flat washer
and t-nut). Keep bolt loose. (fig 19.1 and 19.2)
B: Attach (1980) Top Front Back to (1912) Back Divider with 1 (H2) 1/4 x 2" Hex Bolt (with lock washer, flat
washer and t-nut). Keep bolt loose. (fig. 19.1 and 19.2)
C: Make sure (1980) Top Front Back is level then loosely attach to both (1500) Posts with 4 (S7) #12 x 2" Pan
Screws (with 3/16" flat washer). Keep the screws loose. (fig. 19.1 and 19.2)
Fig. 19.2
1/4" Lock
Washer
3/16" Lock
Washer
1980
S7
1500
H2
Wood Parts
1 x
Back Divider 2 x 2 x 59-3/8"
1912
1 x
Top Front Back 1 x 4 x 38-1/2"
1980
1/4" Flat
Washer
1912
1/4" Lock
1/4" Flat
Washer
Washer
2 x
H2
4 x
S7
Fig. 19.1
3/16" Lock
Washer
1980
1500
S7
1500
1912
1913
Hardware
1/4 x 2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
#12 x 2" Pan Screw
(with 3/16" flat washer)
36
europecustomerservice@kidkraft.com
Advertisement
Table of Contents
