KidKraft Cedar Summit DEVONSHIRE ELITE Installation And Operating Instructions Manual page 26

Step 3: Back Wall Assembly
Part 3
H: Place 2 MOD 5 Pane Windows in the upper openings and attach to frame assembly using 7 (S0) #8 x 7/8"
Truss Head Screws per window. (fig. 3.5, 3.6 and 3.7)
I: Place (9377) Window Brace over the pre-drilled holes in (9353) Cross Support Top and (9370) Right Upright Back
to join the sections. Attach using 2 (H10) ¼ x 2- ¼" Hex Bolts (with lock washer, flat washer and t-nut). (fig. 3.5)
J: Loosely attach (9363) Base End Post to (9372) Cross Frame using 1 (WB1) 5/16 x 1" Wafer Bolt (with flat
washer and t-nut). (fig. 3.8)
K: Place 1 (9451) Cross Support Middle Short over the center hole in (9363) Base End Post and 1 (9366) Narrow
Mid Cross Back over the top hole. Loosely attach boards using 4 (WB1) 5/16 x 1" Wafer Bolts (with flat washer
and t-nut) in the locations shown in fig. 3.8.
Fig. 3.5
Fig. 3.6
S0
Fig. 3.8
FW2
WB1
Wood Parts
1 x Base End Post 1-1/4 x 2-1/4 x 86-29/32"
9363
1 x Narrow Mid Cross 1-1/4 x 3 x 22-5/16"
9366
1 x Cross Support Middle Short 1-1/4 x 3 x 20-13/16"
9451
1 x Window Brace 1-1/4 x 3 x 8"
9377
TN1
9377
FW1
LW1
H10
x 2
TN2
9363
x 4
9372
9370
9353
9451
Hardware
14 x # 8 x 7/8" Truss Head Screw
S0
2 x 1/4 x 2-1/4" Hex Bolt (LW1, FW1, TN1)
H10
4 x 5/16 x 1" Wafer Bolt (FW2, TN2)
WB1
26
Fig. 3.7
x 7 per
S0
window
9366
2 x MOD 5 Pane Window
S0
Other Parts