Table of Contents
Advertisement
Step 36: Attach Slide to Fort
Note: Pre-drill all holes using a 1/8" drill bit before installing the pan screws.
A: Place Slide centred in the opening of the (9364) Center Upright . Slide must be tight to the outside of (9375)
Front Post Right. (fig. 36.1 and 36.2)
B: Attach slide to fort using 3 (S7) #12 x 2" Pan Screws. (fig. 36.2)
Fig. 36.1
Warning!
(9364) Center Upright
9362
9364
Slide
Warning!
center for bolts protruding beyond
T-Nuts. Use extra washers to
eliminate this condition.
Hardware
3 x
#12 x 2" Pan Screw
S7
Must be tight to
Center of the opening
Check entire play
80
Fig. 36.2
S7
Warning!
Must be tight to
(9375) Front Post Right
Other Parts
1 x Slide
9375
Advertisement
Table of Contents
