Back Wall Assembly - KidKraft WINDALE Installation And Operating Instructions Manual

Step 16: Back Wall Assembly
A: On the Back Wall, tight to the floor boards, attach 1 (1227) CE Wall Board to the outside of (2215) Post on
Cafe Wall side with 2 (S2) #8 x 1-1/2" Wood Screws and to the inside face of (2200) Back Divider with 2 (S1) #8 x
1-1/8" Wood Screws.
B: Flush to the top of (2203) Cafe Side Top, making sure board is level, attach 1 (1227) CE Wall Board to the
outside of (2215) Post on Cafe Wall side with 2 (S2) #8 x 1-1/2" Wood Screws and to the inside face of (2200)
Back Divider with 2 (S1) #8 x 1-1/8" Wood Screws.
C: In between (2215) Post and (2200) Back Divider evenly space and attach 3 (2227) Wall Boards to both (1227)
CE Wall Boards using 4 (S0) #8 x 7/8" Truss Screws per board. Make sure the bottom of the boards are tight
against the floor boards. The distance between boards should not exceed 3-1/4"
Fig. 16.1
Back Wall
Wood Parts
3 x Wall Board 1/2 x 4 x 22"
2227
2 x CE Wall Board 1 x 4 x 20"
1227
(fig. 16.1, 16.2 and 16.3)
Top of CE Wall Board
flush to Cafe Side Top
Cafe Wall
2203
12 x
4 x
4 x
(fig. 16.1, 16.2 and 16.3)
2200
S1
x 2 per board
S2
x 2 per board
Outside View
Hardware
#8 x 7/8" Truss Screw
S0
#8 x 1-1/8" Wood Screw
S1
#8 x 1-1/2" Wood Screw
S2
32
(fig. 16.1, 16.2 and 16.3)
2227
S0
2215
1227
Tight to floor boards
Inside View
2215
Fig. 16.2
1227
Fig. 16.3
x 4 per board
2200